Send application » Warranty 2 years or
20 million cycles

Multihead Weigher КАТЕ-220-R

Products to be packed: Small, medium and large-sized products that require high combination accuracy. It is able to doze abrasive products.

01 03 010 09 07 08
01 06 02 03 08 02
03 07 06 09 05 02
01 02 02 03 01 02


Multihead weigher KATE-220-R with 2 levels and 20 weigh hoppers is made for accurate dosing small, medium and large-sized products. The principle of combination dosing allows to score high accuracy while maintaining a high combination speed (up to 140 packs per minute).

20 weigh hoppers provide high speed of dispensing and enable the use of the weigher with two high speed packaging machines at the same time. Another advantage of the weigher is the ability to work with two different products mixing them together.

All weigher parts that are in contact with the product are made of polished stainless steel (for freezed products – corrugated stainless steel). If necessary, all metal surfaces of the product channel may be covered with teflon. eflon type is selected depending on characteristics of product.

To make service easier there is easily removable construction of receiving cone, radial feeders, storage and weight hoppers, deviating chutes.

All electrical and electronic parts are located in a separate box.



  • Combination Speed, max — 140 packs per minute

(70 packs per minute for two-component mixture)

  • Weighing Method — Single Point Load Cell
  • Tare, min — 0.015 kg
  • Tare, max — 1.5 kg
  • Combination Accuracy — 0.1 g
  • No. of Scales — 20 Heads
  • Hopper Volume — 1300 cc
  • Power — AC220V, 230V, 50Hz
  • Power Consumption — 6.5 kW
  • Dust/Water Protection — IP 54
  • Outer Dimensions, not over — 1620(L) x 1620(W) x 2900(H) mm
  • Weight, not over — 1100 kg


Receiving Cone

Dispenser (Dispersion Feeder)

Radial Feeders

Pool Hoppers

Weigh Hoppers

Weight-measuring Units

Control Computer

Control Board

Deviating Chutes

Stream Spreader for Two Packaging Machines