Send application » Warranty 12 months
without limitation

Multihead Weigher КАТЕ-228-MR


Products to be packed: Small, medium -sized sticky products that require high combination accuracy.


03 07 08
07 02


Special multi-head weigher equipped with 2 levels and 28 weigh hoppers has the conveyor feeding and special version of the hoppers (“sliding” type) and is made for accurate dosing of adhesive products.

Instead of the traditional technology based on vibration the radial multihead weigher KATE-228-MR is using mini-conveyors which are feeding the weigh hoppers.

All weigher parts that are in contact with the product are made of smooth stainless steel or dimple stainless steel. If necessary, all metal surfaces of the product channel may be covered by antiadhesive coat.

All electrical and electronic parts are located in a separate box.

The weigher can be used separately for dosing product into finished containers or in conjunction with vertical packaging machines.


  • Combination Speed, max — 2×120 packs per minute
  • Weighing Method — Single Point Load Cell
  • Tare, min — 0.015 kg
  • Tare, max — 1.5 kg
  • Combination Accuracy — 0.1 g
  • No. of Scales — 28 Heads
  • Hopper Volume — 800 cc
  • Power — AC220V, 50Hz
  • Power Consumption — 4 kW
  • Dust/Water Protection — IP 65
  • Outer Dimensions, not over — 1360(L) x 1360(W) x 1600(H) mm
  • Weight, not over — 400 kg


Receiving Cone

Rotary Dispenser (Conical Dispenser)

Screw Feeders

Pool Hoppers

Weigh Hoppers

Weight-measuring Units

Control Computer

Control Board

Deviating Chutes

Stream Spreader for two Packing Machines

Outlet Funnel