Radial combination weighers (Multiheads) are designed for high-precision, high-speed weighing of a wide range of bulk, small-piece, small and medium fractional products, as well as sticky and difficult to slip products.

For dry bulk products

KATE-210-R

Weight combination (Multihead) two-level dispenser KATE-210-R with 10 weight pockets is designed for accurate dosing of loose fine, medium and coarse-fractional products, such as: cereals, pasta, sugar, nuts, candy, snacks, cookies, gingerbread, breakfast cereals , dumplings, frozen semi-finished products, washing powder, hardware, etc.

The parts in contact with the product are made of stainless steel. For frozen products, corrugated stainless steel is used. In the case of packing of non-slip products, all surfaces of the product path can be coated with an anti-adhesive layer.

For ease of maintenance, the easily removable design of the receiving funnel, radial feeders, storage and weighing hoppers, diverting ramps is provided.

All electrical and electronic parts are located in a separate cabinet.

Kinematic Speed, max70 bpm
Tare, min0.015 kg
Tare, max1.5 kg
Weighing MethodSingle Point Load Cell
Combination Accuracy0.1 g
No. of Scales10 pcs
Hopper Volume2500 cc
PowerAC220V 50Hz
Power Consumption3.3 kW
Dust/Water ProtectionIP 54
Outer Dimensions, not over1050 х 1200 х 1440 mm
Weight, not over450 kg

Reception Funnel
Vibrating Dispenser (Cone Distributor)
Radial Feeders
Pool Hoppers
Weight Hoppers
Weighing Modules
Chutes
Outlet Funnel
Control Computer
Remote Control

Timing Hopper
Timing Hopper “Duck-Mouth”
Dual Timing Hopper
Ring Shutter
Central Damper
Damping Overlays
Rotary Cone
Leveler
Small Fractions Set
Individual Chutes for Each Stream
Pedestal
Platform

For typical combination dispensers, the warranty period is 2 years or 20,000,000 duty cycles (whichever comes first).

For more information about the terms of warranty service, you can click here:

AMATA SCALE Warranty Terms

KATE-214-R

Weight combination (Multihead) two-level dispenser KATE-214-R with 14 weight pockets is designed for accurate dosing of loose fine, medium and coarse-fractional products, such as: pasta, cereals, sugar, dumplings, frozen ready-to-cook foods, biscuits, sweets, dryers, donuts, biscuits, hardware, bath salts, accessories, etc.

The parts in contact with the product are made of stainless steel. For frozen products, corrugated stainless steel is used. In the case of packing of non-slip products, all surfaces of the product path can be coated with an anti-adhesive layer.

For ease of maintenance, the easily removable design of the receiving funnel, radial feeders, storage and weighing hoppers, diverting ramps is provided.

All electrical and electronic parts are located in a separate cabinet.

Kinematic Speed, max120 bpm
Tare, min0.015 kg
Tare, max1.5 kg
Weighing MethodSingle Point Load Cell
Combination Accuracy0.1 g
No. of Scales14 pcs
Hopper Volume2500 cc
PowerAC220V 50Hz
Power Consumption3.3 kW
Dust/Water ProtectionIP 54
Outer Dimensions, not over1180 х 1240 х 1500 mm
Weight, not over500 kg

Reception Funnel
Vibrating Dispenser (Cone Distributor)
Radial Feeders
Pool Hoppers
Weight Hoppers
Weighing Modules
Chutes
Outlet Funnel
Control Computer
Remote Control

Timing Hopper
Timing Hopper “Duck-Mouth”
Dual Timing Hopper
Ring Shutter
Central Damper
Damping Overlays
Rotary Cone
Leveler
Small Fractions Set
Individual Chutes for Each Stream
Pedestal
Platform

For typical combination dispensers, the warranty period is 2 years or 20,000,000 duty cycles (whichever comes first).

For more information about the terms of warranty service, you can click here:

AMATA SCALE Warranty Terms

KATE-220-R

Weight combination (Multihead) two-level dispenser KATE-220-R with 20 weight pockets is designed for accurate dosing of loose fine, medium and coarse-fractional products, such as: seeds, fertilizers, tea, coffee beans, cereals, snacks, pasta, grated cheese, muesli, spices, candy, gingerbread, muffins, claydite, etc.

The presence of 20 weight pockets provides a high dispensing rate and makes it possible to use the weigher with two packaging stands at the same time, or with high-speed packaging machines. The advantages of the weigher also include the ability to work with two different products in the mode of mixing them in a given proportion.

For ease of maintenance, the easily removable design of the receiving funnel, radial feeders, storage and weighing hoppers, diverting ramps is provided.

All electrical and electronic parts are located in a separate cabinet.

Kinematic Speed, max2 x 70 bpm
Tare, min0.015 kg
Tare, max1.5 kg
Weighing MethodSingle Point Load Cell
Combination Accuracy0.1 g
No. of Scales20 pcs
Hopper Volume2500 cc
PowerAC220V 50Hz
Power Consumption6.5 kW
Dust/Water ProtectionIP 54
Outer Dimensions, not over1620 х 1620 х 2900 mm
Weight, not over1100 kg

Reception Funnel
Vibrating Dispenser (Cone Distributor)
Radial Feeders
Pool Hoppers
Weight Hoppers
Weighing Modules
Chutes
Outlet Funnel
Control Computer
Remote Control

Timing Hopper
Timing Hopper “Duck-Mouth”
Dual Timing Hopper
Ring Shutter
Damping Overlays
Pedestal
Platform

For special equipment, the warranty period is 12 months without limiting the number of operating cycles.

For more information about the terms of warranty service, you can click here:

AMATA SCALE Warranty Terms

KATE-228-R

Weight combination (Multihead) two-level dispenser KATE-228-R with 28 weight pockets is designed for accurate dosing of loose fine, medium and coarse-fractional products, such as: dried fruits, muesli, tea, coffee beans, cereals, pasta, snacks, frozen semi-finished products, frozen fruits and vegetables, etc.

The presence of 28 weight pockets provides a high dispensing rate and makes it possible to use the weigher with two packaging stands at the same time, or with high-speed packaging machines. The advantages of the weigher also include the ability to work with two different products in the mode of mixing them in a given proportion.

For ease of maintenance, the easily removable design of the receiving funnel, radial feeders, storage and weighing hoppers, diverting ramps is provided.

All electrical and electronic parts are located in a separate cabinet.

Kinematic Speed, max2 x 120 bpm
Tare, min0.015 kg
Tare, max1.5 kg
Weighing MethodSingle Point Load Cell
Combination Accuracy0.1 g
No. of Scales28 pcs
Hopper Volume2500 cc
PowerAC220V 50Hz
Power Consumption6.5 kW
Dust/Water ProtectionIP 54
Outer Dimensions, not over1990 х 1990 х 2500 mm
Weight, not over1500 kg

Reception Funnel
Vibrating Dispenser (Cone Distributor)
Radial Feeders
Pool Hoppers
Weight Hoppers
Weighing Modules
Chutes
Outlet Funnel
Control Computer
Remote Control

Timing Hopper
Timing Hopper “Duck-Mouth”
Dual Timing Hopper
Ring Shutter
Damping Overlays
Pedestal
Platform

For special equipment, the warranty period is 12 months without limiting the number of operating cycles.

For more information about the terms of warranty service, you can click here:

AMATA SCALE Warranty Terms

KATE-210-R30

The weight combination (Multihead) two-level dispenser KATE-210-R30 with 10 weight pockets is designed for accurate dosing of small, medium and large-fraction relatively fragile products, such as: meringue, candy, marshmallow in chocolate, cookies, gingerbread in glaze, bread, chips, waffles, crackers, croissants, frozen seafood, etc.

A distinctive feature of this weigher is the presence of chutes located at an angle of up to 30° to the horizon. The presence of chutes with a more inclined angle allows to reduce the height of the fall of the product and reduce the speed of movement of the product at the outlet of the weigher. Thus, a more careful treatment of the packaged product is achieved.

For ease of maintenance, the easily removable design of the receiving funnel, radial feeders, storage and weighing hoppers, diverting ramps is provided.

Kinematic Speed, max60 bpm
Tare, min0.015 kg
Tare, max1.5 kg
Weighing MethodSingle Point Load Cell
Combination Accuracy0.1 g
No. of Scales10 pcs
Hopper Volume2500 cc
PowerAC220V 50Hz
Power Consumption3.5 kW
Dust/Water ProtectionIP 54
Outer Dimensions, not over1445 х 1445 х 1100 mm
Weight, not over400 kg

Reception Funnel
Vibrating Dispenser (Cone Distributor)
Radial Feeders
Pool Hoppers
Weight Hoppers
Weighing Modules
Chutes
Outlet Funnel
Control Computer
Remote Control

Timing Hopper
Dual Timing Hopper
Central Damper
Damping Overlays
Rotary Cone
Leveler
Pedestal
Platform

For special equipment, the warranty period is 12 months without limiting the number of operating cycles.

For more information about the terms of warranty service, you can click here:

AMATA SCALE Warranty Terms

KATE-214-R30

The weight combination (Multihead) two-level dispenser KATE-214-R30 with 14 weight pockets is designed for accurate dosing of small, medium and large-fraction relatively fragile products, such as: meringue, candy, marshmallow in chocolate, cookies, gingerbread in glaze, bread, chips, waffles, crackers, croissants, frozen seafood, etc.

A distinctive feature of this weigher is the presence of chutes located at an angle of up to 30° to the horizon. The presence of chutes with a more inclined angle allows to reduce the height of the fall of the product and reduce the speed of movement of the product at the outlet of the weigher. Thus, a more careful treatment of the packaged product is achieved.

For ease of maintenance, the easily removable design of the receiving funnel, radial feeders, storage and weighing hoppers, diverting ramps is provided.

Kinematic Speed, max90 bpm
Tare, min0.015 kg
Tare, max1.5 kg
Weighing MethodSingle Point Load Cell
Combination Accuracy0.1 g
No. of Scales14 pcs
Hopper Volume2500 cc
PowerAC220V 50Hz
Power Consumption3.5 kW
Dust/Water ProtectionIP 54
Outer Dimensions, not over1180 х 1260 х 1420 mm
Weight, not over500 kg

Reception Funnel
Vibrating Dispenser (Cone Distributor)
Radial Feeders
Pool Hoppers
Weight Hoppers
Weighing Modules
Chutes
Outlet Funnel
Control Computer
Remote Control

Timing Hopper
Dual Timing Hopper
Central Damper
Damping Overlays
Rotary Cone
Leveler
Pedestal
Platform

For special equipment, the warranty period is 12 months without limiting the number of operating cycles.

For more information about the terms of warranty service, you can click here:

AMATA SCALE Warranty Terms

For long thin products

KATE-210-BR

Weight combination (Multihead) two-level dispenser KATE-210-BR with 10 weight pockets is designed for accurate dosing of long and thin products (no longer than 180 mm), such as: bread straw, grissini, cheese straw, fish straw, sausages, spaghetti, asparagus, cinnamon sticks, waffles, dog sticks, pencils, markers, tubules, etc.

A distinctive feature of this dispenser is the presence of special elements (product orientators), which guide the straw along the food path in a certain position.

The principle of combination dosing allows to achieve high precision packing while maintaining high performance.

For ease of maintenance, the easily removable design of the receiving funnel, radial feeders, storage and weighing hoppers, diverting ramps is provided.

Kinematic Speed, max40 bpm
Tare, min0.05 kg
Tare, max0.3 kg
Weighing MethodSingle Point Load Cell
Combination Accuracy0.1 g
No. of Scales10 pcs
Hopper Volume2500 cc
Hopper Insert Volume1200 cc
PowerAC220V 50Hz
Power Consumption3.8 kW
Operating Pressure in Pipeline0.6 MPa
Consumption of Compressed Air100 l/min
Outer Dimensions, not over1090 х 1240 х 2270 mm
Weight, not over460 kg

Reception Funnel
Vibrating Dispenser (Cone Distributor)
Radial Feeders
Pool Hoppers
Weight Hoppers
Weighing Modules
Chutes
Outlet Funnel
Control Computer
Remote Control

Pedestal
Platform

For special equipment, the warranty period is 12 months without limiting the number of operating cycles.

For more information about the terms of warranty service, you can click here:

AMATA SCALE Warranty Terms

For sticky products that are difficult to slip

KATE-228-MR

Special weight combination (Multihead) two-level dispenser KATE-228-MR with 28 weight pockets, conveyor feed and special “sliding” type pockets is designed for accurate dosing of sticky products, such as: wet food for animals, meat of animals and poultry, shashlyk, seafood , dried fruits, candied fruits, chewing sweets, marshmallows, etc.

Instead of the traditional vibration-based technology, KATE-228-MR weighers use mini-conveyors to feed the product into the pool hoppers.

Hoppers are made of corrugated or smooth stainless steel. If necessary, all the surfaces of the product path can be covered with a release layer.

For ease of maintenance, the easily removable design of the receiving funnel, radial feeders, storage and weighing hoppers, diverting ramps is provided. All electrical and electronic parts are located in a separate cabinet.

Kinematic Speed, max2 x 120 bpm
Tare, min0.015 kg
Tare, max1.5 kg
Weighing MethodSingle Point Load Cell
Combination Accuracy0.1 g
No. of Scales28 pcs
Hopper Volume800 cc
PowerAC220V 50Hz
Power Consumption4 kW
Dust/Water ProtectionIP 54
Outer Dimensions, not over1360 х 1360 х 1600 mm
Weight, not over600 kg

Reception Funnel
Rotary Dispenser (Cone Distributor)
Radial Feeders
Pool Hoppers
Weight Hoppers
Weighing Modules
Chutes
Outlet Funnel
Control Computer
Remote Control

Timing Hopper
Timing Hopper “Duck-Mouth”
Dual Timing Hopper
Leveler
Antiadhesive Set
Pedestal
Platform

For special equipment, the warranty period is 12 months without limiting the number of operating cycles.

For more information about the terms of warranty service, you can click here:

AMATA SCALE Warranty Terms

KATE-210-SR

Weight combination (Multihead) two-level dispenser KATE-210-SR with 10 weight pockets and auger feed is designed for accurate dosing of sticky and wet foods, such as: raw and chilled meat, kebabs, raw and chilled fish, seafood, dried fruits, jelly candies, marmalade, dried vegetables, snacks, kinetic sand, etc.

Instead of the traditional technology based on vibration in auger multihead weigher, augers are used to feed the product into the pool hoppers.

Hoppers are made of corrugated stainless steel, approved for use in the food industry. If necessary, all the surfaces of the product path can be covered with a release layer.

For ease of maintenance, the easy-detachable design of the receiving funnel, screw feeders, storage and weighing hoppers, diverting ramps is provided. All electrical and electronic parts are located in a separate cabinet.

Kinematic Speed, max70 bpm
Tare, min0.015 kg
Tare, max1.5 kg
Weighing MethodSingle Point Load Cell
Combination Accuracy0.1 g
No. of Scales10 pcs
Hopper Volume2500 cc
PowerAC220V 50Hz
Power Consumption1.5 kW
Dust/Water ProtectionIP 65
Outer Dimensions, not over1056 х 1126 х 1329 mm
Weight, not over400 kg

Reception Funnel
Rotary Dispenser (Cone Distributor)
Screw Feeders
Pool Hoppers
Weight Hoppers
Weighing Modules
Chutes
Outlet Funnel
Control Computer
Remote Control

Timing Hopper
Timing Hopper “Duck-Mouth”
Dual Timing Hopper
Antiadhesive Set
Pedestal
Platform

For special equipment, the warranty period is 12 months without limiting the number of operating cycles.

For more information about the terms of warranty service, you can click here:

AMATA SCALE Warranty Terms


KATE-214-SR

Weight combination (Multihead) two-level dispenser KATE-214-SR with 14 weight pockets and auger feed is designed for accurate dosing of sticky and wet foods, such as: raw and chilled meat, kebabs, raw and chilled fish, seafood, dried fruits, jelly candies, marmalade, dried vegetables, snacks, kinetic sand, etc.

Instead of the traditional technology based on vibration in auger multihead weigher, augers are used to feed the product into the pool hoppers.

Hoppers are made of corrugated stainless steel, approved for use in the food industry. If necessary, all the surfaces of the product path can be covered with a release layer.

For ease of maintenance, the easy-detachable design of the receiving funnel, screw feeders, storage and weighing hoppers, diverting ramps is provided. All electrical and electronic parts are located in a separate cabinet.

Kinematic Speed, max120 bpm
Tare, min0.015 kg
Tare, max1.5 kg
Weighing MethodSingle Point Load Cell
Combination Accuracy0.1 g
No. of Scales14 pcs
Hopper Volume2500 cc
PowerAC220V 50Hz
Power Consumption1.5 kW
Dust/Water ProtectionIP 65
Outer Dimensions, not over1150 х 1270 х 1480 mm
Weight, not over500 kg

Reception Funnel
Rotary Dispenser (Cone Distributor)
Screw Feeders
Pool Hoppers
Weight Hoppers
Weighing Modules
Chutes
Outlet Funnel
Control Computer
Remote Control

Timing Hopper
Timing Hopper “Duck-Mouth”
Dual Timing Hopper
Antiadhesive Set
Pedestal
Platform

For special equipment, the warranty period is 12 months without limiting the number of operating cycles.

For more information about the terms of warranty service, you can click here:

AMATA SCALE Warranty Terms

For salads and seafood

KATE-210-KR

Special weight combination (Multihead) two-level dispenser KATE-210-KR with 10 weight pockets, auger feed and special pockets and ramps made of mesh. Designed for accurate dosing of sticky and wet foods, such as: various Korean salads, seafood salads, fresh vegetable salads, sauerkraut, sea kale, etc.

Instead of the traditional technology based on vibration in auger multihead weigher, augers are used to feed the product into the pool hoppers.

Hoppers and chutes of the weigher are made of stainless steel, approved for use in the food industry. Surfaces in contact with the product are made of mesh.

For ease of maintenance, the easy-detachable design of the receiving funnel, screw feeders, storage and weighing hoppers, diverting ramps is provided.

All electrical and electronic parts are located in a separate cabinet.

Kinematic Speed, max40 bpm
Tare, min0.015 kg
Tare, max1.5 kg
Weighing MethodSingle Point Load Cell
Combination Accuracy0.1 g
No. of Scales10 pcs
Hopper Volume2500 cc
PowerAC220V 50Hz
Power Consumption1.5 kW
Dust/Water ProtectionIP 65
Outer Dimensions, not over1100 х 1180 х 1900 mm
Weight, not over500 kg

Reception Funnel
Rotary Dispenser (Cone Distributor)
Screw Feeders
Pool Hoppers
Weight Hoppers
Weighing Modules
Chutes
Outlet Funnel
Control Computer
Remote Control

Pedestal
Platform

For special equipment, the warranty period is 12 months without limiting the number of operating cycles.

For more information about the terms of warranty service, you can click here:

AMATA SCALE Warranty Terms

KATE-214-KR

Special weight combination (Multihead) two-level dispenser KATE-214-KR with 14 weight pockets, auger feed and special pockets and ramps made of mesh. Designed for accurate dosing of sticky and wet foods, such as: various Korean salads, seafood salads, fresh vegetable salads, sauerkraut, sea kale, etc.

Instead of the traditional technology based on vibration in auger multihead weigher, augers are used to feed the product into the pool hoppers.

Hoppers and chutes of the weigher are made of stainless steel, approved for use in the food industry. Surfaces in contact with the product are made of mesh.

For ease of maintenance, the easy-detachable design of the receiving funnel, screw feeders, storage and weighing hoppers, diverting ramps is provided.

All electrical and electronic parts are located in a separate cabinet.

Kinematic Speed, max70 bpm
Tare, min0.015 kg
Tare, max1.5 kg
Weighing MethodSingle Point Load Cell
Combination Accuracy0.1 g
No. of Scales14 pcs
Hopper Volume2500 cc
PowerAC220V 50Hz
Power Consumption1.5 kW
Dust/Water ProtectionIP 65
Outer Dimensions, not over1260 х 1320 х 2040 mm
Weight, not over600 kg

Reception Funnel
Rotary Dispenser (Cone Distributor)
Screw Feeders
Pool Hoppers
Weight Hoppers
Weighing Modules
Chutes
Outlet Funnel
Control Computer
Remote Control

Pedestal
Platform

For special equipment, the warranty period is 12 months without limiting the number of operating cycles.

For more information about the terms of warranty service, you can click here:

AMATA SCALE Warranty Terms

For crumbly curd

KATE-210-СR

Special weight combinational (Multihead) two-level dispenser KATE-210-СR with 10 weight pockets, auger feed and special pockets of “sliding” type is designed for accurate dispensing of sticky and wet products, such as crumbly curd.

Instead of the traditional technology based on vibration in auger multihead weigher, augers are used to feed the product into the pool hoppers.

Hoppers are made of smooth or corrugated stainless steel, approved for use in the food industry. If necessary, all the surfaces of the product path can be covered with a release layer.

For ease of maintenance, the easy-detachable design of the receiving funnel, screw feeders, storage and weighing hoppers, diverting ramps is provided.

All electrical and electronic parts are located in a separate cabinet.

Kinematic Speed, max40 bpm
Tare, min0.015 kg
Tare, max1.5 kg
Weighing MethodSingle Point Load Cell
Combination Accuracy0.1 g
No. of Scales10 pcs
Hopper Volume1300 cc
PowerAC220V 50Hz
Power Consumption1.5 kW
Dust/Water ProtectionIP 65
Outer Dimensions, not over1100 х 1050 х 2000 mm
Weight, not over400 kg

Reception Funnel
Rotary Dispenser (Cone Distributor)
Screw Feeders
Pool Hoppers
Weight Hoppers
Weighing Modules
Chutes
Outlet Funnel
Control Computer
Remote Control

Pedestal
Platform

For special equipment, the warranty period is 12 months without limiting the number of operating cycles.

For more information about the terms of warranty service, you can click here:

AMATA SCALE Warranty Terms

KATE-214-СR

Special weight combinational (Multihead) two-level dispenser KATE-214-СR with 14 weight pockets, auger feed and special pockets of “sliding” type is designed for accurate dispensing of sticky and wet products, such as crumbly curd.

Instead of the traditional technology based on vibration in auger multihead weigher, augers are used to feed the product into the pool hoppers.

Hoppers are made of smooth or corrugated stainless steel, approved for use in the food industry. If necessary, all the surfaces of the product path can be covered with a release layer.

For ease of maintenance, the easy-detachable design of the receiving funnel, screw feeders, storage and weighing hoppers, diverting ramps is provided.

All electrical and electronic parts are located in a separate cabinet.

Kinematic Speed, max70 bpm
Tare, min0.015 kg
Tare, max1.5 kg
Weighing MethodSingle Point Load Cell
Combination Accuracy0.1 g
No. of Scales14 pcs
Hopper Volume1300 cc
PowerAC220V 50Hz
Power Consumption1.5 kW
Dust/Water ProtectionIP 65
Outer Dimensions, not over1250 х 1150 х 2150 mm
Weight, not over500 kg

Reception Funnel
Rotary Dispenser (Cone Distributor)
Screw Feeders
Pool Hoppers
Weight Hoppers
Weighing Modules
Chutes
Outlet Funnel
Control Computer
Remote Control

Pedestal
Platform

For special equipment, the warranty period is 12 months without limiting the number of operating cycles.

For more information about the terms of warranty service, you can click here:

AMATA SCALE Warranty Terms